40pcs HSS Taps&dies saita
Siffofin
1. Babban Gudun Karfe (HSS) Gina
2. Faɗin girman girman
3.Kit ɗin na iya haɗawa da nau'ikan famfo daban-daban kamar tapers, matosai da taps na ƙasa don saduwa da buƙatun zaren daban-daban.
4. Matukar daidaitacce
5. Akwatin ajiya.
6. Madaidaicin Zaren
7. Wannan kit ɗin yana aiki da abubuwa iri-iri, gami da ƙarfe, aluminum, tagulla, da sauran ƙarfe.
8. Daidaituwa
9. Ƙarin kayan haɗi
Gabaɗaya, saitin famfo na HSS mai guda 40 da mutu yana ba da zaɓi na kayan aiki da yawa don yanke zaren ciki da waje, yana mai da shi ƙari mai mahimmanci ga taron bita, garejin mota da mahallin masana'antu.
KYAUTATA NUNA
masana'anta
ƙayyadaddun bayanai
| Abubuwa | Ƙayyadaddun bayanai | Daidaitawa |
| TAPS | Madaidaicin bututun hannu | ISO |
| DIN352 | ||
| DIN351 BSW/UNC/UNF | ||
| DIN2181 | ||
| Mashin famfo mai sarewa madaidaiciya | DIN371/M | |
| DIN371/W/BSF | ||
| DIN371/UNC/UNF | ||
| DIN374/MF | ||
| DIN374/UNF | ||
| DIN376/M | ||
| DIN376/UNC | ||
| DIN376W/BSF | ||
| DIN2181/UNC/UNF | ||
| DIN2181/BSW | ||
| DIN2183/UNC/UNF | ||
| DIN2183/BSW | ||
| Karkataccen bututu | ISO | |
| DIN371/M | ||
| DIN371/W/BSF | ||
| DIN371/UNC/UNF | ||
| DIN374/MF | ||
| DIN374/UNF | ||
| DIN376/M | ||
| DIN376/UNC | ||
| DIN376W/BSF | ||
| Karkace mai nunin famfo | ISO | |
| DIN371/M | ||
| DIN371/W/BSF | ||
| DIN371/UNC/UNF | ||
| DIN374/MF | ||
| DIN374/UNF | ||
| DIN376/M | ||
| DIN376/UNC | ||
| DIN376W/BSF | ||
| Mirƙira tap/Ƙirƙirar famfo | ||
| Matsa bututun zaren | G/NPT/NPS/PT | |
| Farashin 5157 | ||
| Farashin 5156 | ||
| DIN353 | ||
| Guda taps | DIN357 | |
| Haɗe-haɗe da matsawa | ||
| Taps kuma mutu saita |
| Girman | L | Lc | d | k | rami na kasa | |||||
| M2*0.4 | 40.00 | 12.00 | 3.00 | 2.50 | 1.60 | |||||
| M2.5*0.45 | 44.00 | 14.00 | 3.00 | 2.50 | 2.10 | |||||
| M3*0.5 | 46.00 | 11.00 | 4.00 | 3.20 | 2.50 | |||||
| M4*0.7 | 52.00 | 13.00 | 5.00 | 4.00 | 3.30 | |||||
| M5*0.8 | 60.00 | 16.00 | 5.50 | 4.50 | 4.20 | |||||
| M6*1.0 | 62.00 | 19.00 | 6.00 | 4.50 | 5.00 | |||||
| M8*1.25 | 70.00 | 22.00 | 6.20 | 5.00 | 6.80 | |||||
| M10*1.5 | 75.00 | 24.00 | 7.00 | 5.50 | 8.50 | |||||
| M12*1.75 | 82.00 | 29.00 | 8.50 | 6.50 | 10.30 | |||||
Ku rubuta sakonku anan ku aiko mana
